KROMEX TECHNOLOGY

Kromex® technology enables the shaping of logos, badges, emblems and any of the signs that identify your product.
Tooling costs are lower, comparing to other chrome technologies, as, for example, injection molding.
.
Technical specifications
- Up to 12 mm thickness (standard thickness between2 and 6 mm)
- Featuring curved surfaces and/or sharp edges, in order to achieve even the most complex geometrical shapes
- Screen printed graphics or resin doming may add a special value to basic chrome effect
- To be used on plain or slightly curved surfaces
- Fits for outdoor use
Standard finishing
- Polished, matt, brushed chrome
- Polished, matt, brushed aluminium
- Screen printed colours: gold, yellow, orange, red, green, violet, blue, black
AUTOMOTIVE TESTS - SYSTEMS: KROMEX CDF 200 E | |||
TEST | REF. METHOD | TEST CONDITIONS | RESULTS |
Heat Resistance | MS-CG12 | 250 h. at 80°C | no gloss change no delamination |
Humidity Resistance | MS-CG12 | 250 h. at 40°C 100% R.H. | no gloss change no delamination |
Salt Spray resistance | ASTM B117-95 | 2000 hh 38° C 5% NaCl | no gloss change no delamination |
Thermal Cycles | TSM 7508G | 2 h@-30°, 0,5 h @100°, 5 cycles | no gloss change no delamination |
Acid resistance | MS-CG12 | Spot Test 0,5-10% conc. | no gloss change no delamination |
Xenon WOM | SAE j1960-89 (2000 hh) | 65°C-cycle 102minUV + 18 min. UV/water spray | no color change minimal gloss change |
Weathrometer QUV-A | SAE J 2020 | 1600 hh (8hUV 70° - 4hcond.50°C) | no color change minimal gloss change |